2N® LTE Verso Configuration Manual
195
/
224
•
•
•
•
•
•
•
•
List of Parameters
Synchronise
–
push the button to synchronise the intercom time value with your PC time
value.
Automatic Detection
– define whether the time zone shall be detected automatically
from My2N. In case automatic detection is disabled, the Manual selection parameter is
Used (manually selected time zone or Own rule).
Detected Time Zone
– display the automatically found time zone. In case the function is
unavailable or disabled, N/A is displayed.
Manual Selection
– set the installation site time zone. Set the time shift and summer/
winter time transitions.
Custom Rule
– if the device is installed on a site that it not included in the Time Zone
parameter, set the time zone rule manually. The rule is applied only if the Time Zone
parameter is set to Manual.
Use NTP server
– enable the NTP server use for intercom time synchronisation.
NTP server address
– set the IP address/domain name of the NTP server used for your
intercom time synchronisation.
NTP time status
–
display the state of the last local time synchronisation attempt via the
NTP server
(Not Synchronised, Synchronised, Error).
