2N® LTE Verso Configuration Manual
7
/
224
•
•
•
•
•
•
Display name
– set the name to be displayed as CLIP on the called party's phone, in the
login window and on the web interface start page.
Phone number (ID)
– set the intercom phone number (or another unique ID composed of
characters and digits) to identify the intercom uniquely in calls and registration.
Domain
– set the domain name of the service with which the intercom is registered.
Typically, it is equivalent to the SIP Proxy or Registrar address. If you do not use a SIP
Proxy in your intercom installation, enter the intercom IP address.
If you use a SIP server (Proxy, Registrar), set the addresses for the following network elements:
Proxy address
– set the SIP Proxy IP address or domain name.
Registrar address
– set the SIP Registrar IP address or domain name. The SIP Proxy and
SIP Registrar addresses are usually identical.
Registration enabled
– enable intercom registration with the set SIP Registrar.
If your SIP server requires authentication of terminal equipment, enter the following
parameters:
