manualshive.com logo in svg

2N IP Vario, Installation Manual, Page: 95 / 106

Share
Download
2N IP Vario Installation Manual Download Page 95

2N TELEKOMUNIKACE a.s., www.2n.cz

95/106

3.5 Maintenance

Cleaning

If used frequenly, the device surface, the keypad in particular, gets dirty. To clean it, 

use  a  piece  of  soft  cloth  moistened  with  clean  water.  We  recommend  you  to  follow 

these principles while cleaning:

Never use aggressive detergents (such as abrasives or strong disinfectants).

Use suitable cleaning agents for glass lens cleaning (cleaners for glasses, optic 
devices screens, etc.).

Alcohol-based cleaners may be applied.

Clean the device in dry weather in order to make waste water evaporate quickly.

We recommend using cleaning wipes designed for IT / electronic items.

Future Tag Replacement, Programming Changes

For necessary steps refer to the preceding subsections. Keep the following for future 

changes:

This manual

Unused transparent foil strips for button tags

Caution

Always  use  the  product  for  the  purpose  it  was  designed  and 
manufactured for, in compliance herewith.

The  manufacturer  reserves  the  right  to  modify  the  product  in  order  to 
improve its qualities.

2N   IP  Vario 

®

contains  no  environmentally  harmful  components.  When 

the product's service life is exhausted and you would like to dispose of it 
please do so in accordance with applicable legal regulations.

Summary of Contents for IP Vario











































































































Reviews:

No comments