2N IP Vario, Installation Manual, Page: 85 / 106

2N TELEKOMUNIKACE a.s., www.2n.cz 85/106
1.
2.
3.
4.
Calling to User-Defined Telephone Number
If the (refer to the Intercom Configuration / Hardware / Telephone function enable
Keypad subsection of Configuration Manual) is selected, you can call the user-defined
telephone number using the numeric keypad. 2N IP Vario
®
Procedure:
Push .
You can hear the continuous tone from the loudspeaker.
Enter the telephone number using the numeric keypad and push again for
confirmation.
You can also hang up the call any time by pushing if the button Hang-up by #
is enabled; refer to the Intercom Configuration / Hardware / Keypad subsection
of Configuration Manual.
Incoming Call Answer and Reject
If the automatic incoming call answer is disabled (refer to the Intercom Configuration
/ Services / Phone / Calls subsection of Configuration Manual), a call coming to
is signalled with loud ringing. Push to answer and to reject the call. 2N IP Vario
®
Code Door Opening (Switch Activation)
2N IP Vario
®
is equipped with a door unlocking switch. To activate the switch enter
the valid code (refer to the Intercom Configuration / Hardware / Switches subsection
of Configuration Manual) on the numeric keypad.
Procedure:
Enter the lock 1 or lock 2 activating code using the numeric keypad and push
.
A valid code is signalled by a continuous switch activation (lock opening)
signalling tone. An invalid code is announced by acoustic signalling .
Profile Activation and Deactivation
You can activate or deactivate a profile and define call routing to the telephone
numbers assigned to the profile using the numeric keypad. For more details refer to
the Intercom Configuration / Directory / Time Profiles subsection of Configuration
Manual subsection.