2N IP Vario Installation Manual Download Page 79

Page: 79 / 106

2N TELEKOMUNIKACE a.s., www.2n.cz

79/106

3.1 Configuration

Use a PC equipped with any web browser to configure

2N IP Vario

Launch your web browser (Internet Explorer, Firefox, etc.).

Enter the IP address of your intercom (

, e.g.).

http://192.168.1.100/

user name and

password.

Admin

You have to know the IP address of your device to log in to the integrated web server.

By default,

is switched into the dynamic IP address mode, i.e. it obtains

2N IP Vario

the IP address automatically if a properly set DHCP server is available in your LAN. If

no such DHCP server is available, you can operate

in the static IP address

2N IP Vario

mode.

IP Address Retrieval

If your device remains inaccessible (you have forgotten the IP address, or the LAN

configuration has changed, for example), change the LAN settings using the buttons

on the device.

Take the following steps to retrieve the

IP address:

2N IP Vario

Connect (or, if connected, disconnect and reconnect)

to the power

2N IP Vario

supply.

Wait for the second sound signal

1-button models: Press the quick dial button on the basic unit five times.

3-buttons models: Press the second quick dial button on the basic unit five

Summary of Contents for IP Vario











































































































Search results

Summary of Contents for IP Vario

Reviews:

2N IP Vario, Installation Manual, Page: 79 / 106

Search results

Summary of Contents for IP Vario

Reviews: