19
2N TELEKOMUNIKACE a.s., www.2n.cz
®
overload). Remember that multiple GSM gateways used in one location may
overload the base transceiver station (BTS) you are currently logged in to. This
may lead to a permanent or occasional rejection of GSM/UMTS calls!
No strong electromagnetic radiation is allowed on the
2N BRI Enterprise /
®
installation site.
BRI Lite
No strong electromagnetic reflections are allowed on the
2N BRI Enterprise /
®
antenna installation site.
BRI Lite
An inappropriate location of
or its antenna
2N BRI Enterprise / BRI Lite
®
close to television, broadcasting and/or other rf–sensitive sets may impair the
function of these sets.
Being a source of radio frequency emissions, the
2N BRI Enterprise / BRI
®
antenna should not occur in the close vicinity of the human body. The health
Lite
hazard is higher than with mobile phones as, generally, gateways shared by
multiple users show a very high traffic.
It is recommended that the power supply adapter should be connected to a
network with a UPS back–up and due overvoltage protection.
SIM Card Inserting/Removing
Insert the SIM card in the
bottom as shown in the
2N BRI Enterprise / BRI Lite
®
figure. As the SIM slots are of the Push/Pull type, just slide the card in and push it into
position. Push the SIM gently to slide it out of the slot.
Caution
Be sure to
such provider/SIM card services as call forwarding, call
set
barring, preferred networks, SMS centre, etc. in your mobile phone
into
before inserting the SIM card
2N BRI Enterprise / BRI
®
.
Lite
If two SIM cards are used, make sure that both the SIM cards have
or
.
one and the same PIN
PIN code request disable
Having inserted the SIM card, restart
2N BRI Enterprise / BRI
®
to make the SIM card log in.
Lite
Remember to
the
service before using
disable
Another call on line
the SIM cards
!
