68
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Note
Set the two parameters above (
,
) properly to
First count Next count
count free minutes on SIM cards correctly. These parameters are used
for limiting outgoing calls depending on free minutes. The CDRs
contain real data.
Day limit of called minutes – set the maximum count of minutes to be called
within a day via the selected SIM card.
Time limits
There are two SIM use time limits in a GSM group.
Call tariffs
Use this function to assign up to four independent free minute counters to a group of
GSM modules (SIM cards), e.g.:
free minutes for calls to own GSM/UMTS network;
Tariff 1 =
free minutes for calls to other GSM/UMTS networks;
Tariff 2 =
free minutes for calls to fixed network;
Tariff 3 =
free minutes for calls within a closed user group (VPN).
Tariff 4 =
Complete the LCR table (assign prefixes to tariffs) properly to make full use of this
function. If routing to a tariff is not used, the global free minutes function will be used
in the LCR table.
Free minutes
Set the free minutes for the tariff offered by the provider.
Transferred minutes
Set the maximum count of free minutes to be transferred
to the next period.
Day of restoring free minutes
Set a day on which the free minute counters
will be reset automatically. Select every 24 hours, a day in a month, or a day in a
week.
Week of restoring free minutes
Set a week in which the free
in month
minute counters will be reset automatically. Set the week number only if the
restoration takes place
in a month, e.g., or keep
for
every other Friday
Every
the other cases.
Caution
The recommended free minute counter value is X–5, where X is the
number of free minutes obtained from the GSM/UMTS provider. Thus,
you can avoid exceeding limits.
The manufacturer is not responsible for additional call costs incurred
as a result of exceeding your GSM/UMTS provider's free minute/SMS
limit.
GSM Incoming Groups
2N BRI
®
gateway allows you to work with two groups of incoming calls. You can set
different values for each of them.
