2N 9153201-E Installation Manual Download

Page: 61 / 63

5.3 General Instructions and Cautions

Please read this User Manual carefully before using the product. Follow all instructions

and recommendations included herein.

Any use of the product that is in contradiction with the instructions provided herein

may result in malfunction, damage or destruction of the product.

The manufacturer shall not be liable and responsible for any damage incurred as a

result of a use of the product other than that included herein, namely undue

application and disobedience of the recommendations and warnings in contradiction

herewith.

Any use or connection of the product other than those included herein shall be

considered undue and the manufacturer shall not be liable for any consequences

arisen as a result of such misconduct.

Moreover, the manufacturer shall not be liable for any damage or destruction of the

product incurred as a result of misplacement, incompetent installation and/or undue

operation and use of the product in contradiction herewith.

The manufacturer assumes no responsibility for any malfunction, damage or

destruction of the product caused by incompetent replacement of parts or due to the

use of reproduction parts or components.

The manufacturer shall not be liable and responsible for any loss or damage incurred

as a result of a natural disaster or any other unfavourable natural condition.

The manufacturer shall not be held liable for any damage of the product arising during

the shipping thereof.

The manufacturer shall not make any warrant with regard to data loss or damage.

The manufacturer shall not be liable and responsible for any direct or indirect damage

incurred as a result of a use of the product in contradiction herewith or a failure of the

product due to a use in contradiction herewith.

All applicable legal regulations concerning the product installation and use as well as

provisions of technical standards on electric installations have to be obeyed. The

manufacturer shall not be liable and responsible for damage or destruction of the

product or damage incurred by the consumer in case the product is used and handled

contrary to the said regulations and provisions.

The consumer shall, at its own expense, obtain software protection of the product.

The manufacturer shall not be held liable and responsible for any damage incurred as

a result of the use of deficient or substandard security software.

CIE-Group Ltd, www.cie-group.com 61 / 63

Summary of Contents for 9153201-E
































































Search results

Summary of Contents for 9153201-E

Reviews:

Related manuals for 9153201-E

Brands by name

Popular brands

2N 9153201-E, Installation Manual

Search results

Summary of Contents for 9153201-E

Reviews:

Related manuals for 9153201-E

Brands by name

Popular brands