2N 9153201-E Installation Manual Download Page 53

Page: 53 / 63

3.5 Maintenance

Cleaning

If used frequently, the intercom gets dirty. To clean it, use a piece of soft cloth

moistened with clean water. We recommend you to obey the following principles

while cleaning:

Never use aggressive detergents (such as abrasives or strong disinfectants).

Alcohol-based cleaners may be applied.

Clean the device in dry weather in order to make waste water evaporate quickly.

Future Tag Replacement, Programming Changes

For necessary steps refer to the preceding subsections. Keep the following for future

changes:

This manual

Unused transparent foil strips for button tags

Caution

Always use the product for the purpose it was designed and
manufactured for, in compliance herewith.

The manufacturer reserves the right to modify the product in order to
improve its qualities.

2N Helios

contains no environmentally harmful components. When

Uni

the product's service life is exhausted and you would like to dispose of it
please do so in accordance with applicable legal regulations.

CIE-Group Ltd, www.cie-group.com 53 / 63

Summary of Contents for 9153201-E
































































Search results

Summary of Contents for 9153201-E

Reviews:

Related manuals for 9153201-E

Brands by name

Popular brands

2N 9153201-E, Installation Manual

Search results

Summary of Contents for 9153201-E

Reviews:

Related manuals for 9153201-E

Brands by name

Popular brands