Programming
The access to this mode is password-protected. For details refer to the Programming
section. The voice menu helps you considerably with programming the intercom.
Having entered the programming mode, you can also alter any parameter and
memory settings.
Caution
The above mentioned functions (except for calls to the intercom)
require a
telephone set
tone-dialling
.
Signals Overview
Signal
Name
Meaning
Confirmation
Sent immediately after line seizure for incoming
calls (can be heard by the calling party).
Signals switch activation (by DTMF) – can be
heard by the person "at the other end" who
activated the switch.
Refusal
Signals that a non-programmed button has been
pressed.
Can be heard from the loudspeaker after line
connection (first connection signalling).
Signals an incoming call if intercom has not been
programmed
Storing
Signals switch deactivation (if activated by DTMF).
Hang-up
Sent to notify that the call is terminated (in all
cases).
Long continuous
tone
Signals that the unit is going through full
initialisation or dialling memory or password
clearing.
CIE-Group Ltd, www.cie-group.com 42 / 63
