![background image](http://html.mh-extra.com/html/2m-technology/vsc-3000a/vsc-3000a_operating-manual_439729014.webp)
1. Unlock the solar panels (A), press the auto-lock for solar slides (B) and pull the panels to the outermost
position and make sure it is locked in place (C).
NOTICE
Under charging condition, make sure the solar panels are faced to the
direction of the sun, no shading and the surface is clean.
NOTICE
Do not operate the unit in the dangerous area where there are macadams fly and under weather
condition with strong wind. It will damage the solar panels.
WARNING
Do not unplug the solar panel connectors when it is under charging
condition. (It may cause personal injury.)
2. Connect the solar panel connectors to those plugs on the cabinet. Turn on the breakers for solar panels and
batteries on the control panel.
3. Check oil tank, valve blocks, hydraulic cylinder, hoses and oil joints. Make sure there is no leakage and
enough hydraulic oil in the tank. Then
press the lifting button on the controller to adjust the solar panels to the
required angle.
A
B
C
14
SOLAR PANELS SLIDING OUT AND ANGLE ADJUSTMENT BY HYDRAULIC SYSTEM