![background image](http://html.mh-extra.com/html/2m-technology/vsc-3000a/vsc-3000a_operating-manual_439729028.webp)
1.
Check oil tank, valve blocks, hydraulic cylinder, hoses and oil joints. Make sure there is no leakage and enough
hydraulic oil in the tank.
2.
Check the mast electrical cord for damage.
WARNING
Do not
operate the unit
if the insulation on the electrical cord is cut or worn through.
Bare wires in contact with the mast or frame may energize the trailer and cause electrocution.
Repair or replace cord.
3. Press the lower button on the hydraulic system controller and lower the mast to its original static height.
28
LOWER
THE
MAST
WITH THE OPTIONAL
HYDRAULIC