Turnstile Controller User Manual
| 2M Technology
2
www.2MTechnology.net
4.
IR Number:
number of IR sensors that are connected. The default number is 8.
5.
Open Speed:
speed of the gate opening. The default number is 5.
6.
Open Angle:
angle which the gate will open
7.
IR Polarity:
only for factory use
8.
Test Mode:
only for factory use
9.
Open Direction:
used to program the turnstile. Only for factory use
10.
Safe Mode:
a. Safe close: After people pass through, then the gate will close. This is the default setting and the most
suggested one to use.
b. Safety zone
c. Fast close: the gate will close faster (not suggested to use)
11.
Open cnt:
This is a memory function.
a. Open count: If you tap a certain number of times continuously, then you will be able to pass that same
number of times. For example: if you tap your entry card 10 times continuously, the gate will grant 10 entries.
b. Open one: will only let one person through, no matter how many times the card is tapped. For example: if
you tap your entry card 10 times continuously, the gate will still only grant 1 person through.
12.
Count clr:
clear the number of entries and exits
13.
Link In:
this function is used to integrate with fire alarms
14.
Servo Type:
only for factory use
15.
Inner Swipe:
allows for someone to be in the passageway and then tap their card instead of having to be outside
of the passageway
16.
LED Mode:
to set the LED lights. Only applicable if we have sent you the appropriate LED lights.
17.
Emergency Open:
set the open direction when needing to open during an emergency (such as when the gate is
powered off)
18.
Reverse:
means that when you tap your card at entry, one person will also be allowed to exit at the same time.
Can have the gates close or maintain the same position
19.
Tail In:
when people follow in without tapping their own card, the turnstile should either close or maintain the
same position
