2E 43A06L, User Manual

Page: 37 / 89

37
EN
C
I C
A
R
D
/T2 /S2 /S2
WALL MOUNTING
STAND INSTALLATION/DISASSEMBLY
WARNING: THE LED DISPLAY IS VERY FRAGILE AND MUST ALWAYS BE PROTECTED WHEN REMOVING
THE STAND.
Make sure there are no sharp objects that can scratch or damage the LED display, do not press on the front
of the device, the screen may crack.
1. Disconnect all cables and cords connected to the device.
2. Place the device on a flat surface with the back facing up, please place a soft material (such as a pillow
or a thick piece of foam) under the screen.
3. To remove the stand, loosen the screws of its mounting holes, gently pull down to detach.
WALL MOUNTING
This unit is VESA compliant and intended for wall mounting only with VESA 15.8 X15.8
inch (400 mm x 400 mm) type mounts specifically designed for plasma TVs (mount not
included). The screw length should not exceed 10 mm.
NOTE. Be sure to remove the stand before mounting the device on the wall.
Хх х хх Ххх хх х х х
Four mounting holes
(screw size M6)
BM4x25mm 6 хх