2E 43A06L, User Manual

Page: 35 / 89

35
EN
EXPLANATION AND INSTRUCTIONS FOR TV
CONTROL PANEL ELEMENTS
FRONT VIEW
ПFor remote control, working distance and signal reception angle, see next page
Power/Standby Indicator: Blue and Red Dual LED. The LED is red when the TV is off and blue when it is
on. Remote control sensor: the device’s IR sensor receives the infrared beam sent by the remote control.
NOTE. If there is a protective film around the screen, remove it before using the TV.
①
Power/Standby Indicator
②
Remote control sensor
SIDE VIEW
1. POWER ( ):
in OFF mode press the button briefly to turn on the TV. In ON mode press and hold
the button to turn off the TV. This button serves to confirm selection in the menu mode or selecting
the signal source.
2. VOL-:
Reduces the volume. This button serves as a left arrow when selecting an input source.
3. VOL+:
Increases the volume. This button serves as a right arrow when selecting an input source.
4. CH-:
when pressed briefly this button serves as switching channels button. Toggles down the
channel list. This button acts as the down arrow in menu mode.
5. CH +:
when pressed briefly this button serves as switching channels button. Toggles up the
channel list. This button acts as the up arrow in menu mode.
6. MENU:
open the OSD (On Screen Display) menu.
7. SOURCE:
press to select the TV signal source.
③
⑤
⑦
①
②
④
⑥