2E 43A06L, User Manual

Page: 33 / 89

33
EN
EQUIPMENT
GETTING STARTED
Check the presence of all additional accessories before installing the product.
TV x 1
Remote control x 1
Batteries (AA) x 2
User manual x 1
Energy label x 1
Microfiche x 1
Stand parts x 2
Stand assembly screws x 6
USING THE REMOTE CONTROL
• Point the remote control at the remote-control sensor located on the device.
• If there is a strong external light source, the operation of the infrared sensor of the remote control may get
worse, which will lead to its poor operation.
• The recommended distance for remote control is about 16 feet (5 meters).
BATTERY INSTALLATION
CAUTION:
Danger of explosion if batteries are not replaced correctly.
NOTES
•
If the remote control is not used for a long time, remove the batteries to avoid damage to the accessory
caused by corrosion if the batteries leak.
• Do not install old and new batteries in the remote at the same time. Do not install alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium) batteries at the same time.
• Always remove batteries as soon as they are discharged.
• Discharged batteries can leak and seriously damage the remote control.
1. Open the battery compartment cover.
2. Insert the batteries.
CAUTION:
Do not throw batteries into fire. Batteries can explode or leak. Batteries should
not be exposed to excessive heat, for example, open sunlight, fire, etc.
BATTERY REPLACEMENT
When the batteries run out, the operating range of the remote control is greatly reduced, so you need to replace the
batteries in time.