2DI ThermaViewer, Manual

Page: 21 / 36

Features and Operation
21
6. In the zoomed-out mode more than one collected temperature appears in each column. So if
the ThermaViewer is set to store data every minute and the graph is set to “each column = 2
minutes,” then each column will have a vertical line in it with the high temperature as the top of
the line and the low temperature being the bottom of the line (see illustration at left). Further,
if the graph is zoomed out so that “each column = 64 minutes,” the represented temperatures
(in this case all 64 of them) will appear as a single vertical line with the highest collected
temperature being the top of the line and the lowest recorded temperature being the bottom of
the line. ThermaViewer is capable of displaying columns in the following temperature data
modes:
1 stored temperature
2 stored temperatures
4 stored temperatures
8 stored temperatures
16 stored temperatures
32 stored temperatures
64 stored temperatures
128 stored temperatures
(continued)