Features and Operation
27
Probe One (or Probe Two) Parameters/Setup
The Probe One and Probe Two Parameters/Setup are identical. The Probe One (or Probe Two)
Parameters/Setup Menu is accessed via the
Menu Mode
(see illustration one at left). Use the
Down arrow key to position the cursor next to the Probe One (or Probe Two) Parameters/Setup
option and press the ENT key to display.
The Probe One (or Probe Two) Parameters/Setup Menu allows customization of the
ThermaViewer’s display (such as sample rate, data storage rate, and data storage value) to meet
the owner’s specific needs (see illustration two at left). The fields described in the following
pages may be changed by an owner. The ENT key is used to advance from one field to the next.
The Up and Down arrow keys may be used to change the value in a field. Continually pressing
the ESC or ENT key will eventually exit the Probe One (or Probe Two) Parameters/Setup Menu.
Important:
In order for a change in a field to take affect, the ENT key must be pressed.
(continued)
Summary of Contents for ThermaViewer
