ZyXEL Communications ZyXEL Prestige 660R, Руководство пользователя

Страница: 143 / 297

Prestige 660R ADSL 2+ Access Gateway
Internet Access 17-3
Figure 17-4 Menu 3.2.1 IP Alias Setup
Follow the instructions in the following table to configure IP Alias parameters.
Table 17-1 Menu 3.2.1 IP Alias Setup
FIELD DESCRIPTION EXAMPLE
IP Alias Choose Yes to configure the LAN network for the Prestige. Yes
IP Address Enter the IP address of your Prestige in dotted decimal notation 192.168.2.1
IP Subnet
Mask Your Prestige will automatically calculate the subnet mask based on the
IP address that you assign. Unless you are implementing subnetting,
use the subnet mask computed by the Prestige 255.255.255.0
RIP Direction
Press [
SPACE BAR
] to select the RIP direction. Choices are None ,
Both , In Only or Out Only .
None
Version
Press [
SPACE BAR]
to select the RIP version. Choices are RIP-1 ,
RIP-2B or RIP-2M .
RIP-1
Incoming
Protocol Filters Enter the filter set(s) you wish to apply to the incoming traffic between
this node and the Prestige.
Outgoing
Protocol Filters Enter the filter set(s) you wish to apply to the outgoing traffic between
this node and the Prestige.
When you have completed this menu, press [
ENTER
] at the prompt “Press ENTER to Confirm…” to save
your configuration, or press [
ESC
] at any time to cancel.
Menu 3.2.1 - IP Alias Setup
IP Alias 1= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
IP Alias 2= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
Enter here to CONFIRM or ESC to CANCEL: