ZyXEL Communications ZyXEL Prestige 660R, Руководство пользователя

Страница: 146 / 297

Prestige 660R ADSL 2+ Access Gateway
17-6 Internet Access
Table 17-2 Menu 4 Internet Access Setup
FIELD DESCRIPTION EXAMPLE
Sustain Cell
Rate (SCR)= 0
Sustained Cell Rate is the mean cell rate of a bursty, on-off traffic
source that can be sent at the peak rate, and a parameter for burst-
traffic. Type the SCR; it must be less than the PCR. 0
Maximum Burst
Size (MBS)= 0
Refers to the maximum number of cells that can be sent at the peak
rate. Type the MBS. The MBS must be less than 65535. 0
My Login Configure the My Login and My Password fields for PPPoA and
PPPoE encapsulation only. Enter the login name that your ISP gives
you. If you are using PPPoE
encapsulation , then this field must be of
the form user@domain where domain identifies your PPPoE service
name.
N/A
My Password Enter the password associated with the login name above. N/A
ENET ENCAP
Gateway Enter the gateway IP address supplied by your ISP when you are
using
ENET ENCAP encapsulation.
N/A
Idle Timeout This value specifies the number of idle seconds that elapse before
the Prestige automatically disconnects the PPPoE session. 0
IP Address
Assignment
Press [
SPACE BAR
] to select Static or Dynamic address
assignment.
Dynamic
IP Address Enter the IP address supplied by your ISP if applicable. N/A
Network
Address
Translation
Press [
SPACE BAR
] to select None , SUA Only or Full Feature .
Please see the NAT Chapter for more details on the SUA (Single
User Account) feature.
SUA Only
Address
Mapping Set
Type the numbers of mapping sets (1-8) to use with NAT. See the
NAT chapter for details.
N/A
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
If all your settings are correct your Prestige should connect automatically to the Internet. If the connection
fails, note the error message that you receive on the screen and take the appropriate troubleshooting steps.