ZyXEL Communications ZyXEL Prestige 660R, Руководство пользователя

Страница: 151 / 297

Prestige 660R ADSL 2+ Access Gateway
Remote Node Configuration 18-5
Table 18-1 Menu 11.1 Remote Node Profile
FIELD DESCRIPTION EXAMPLE
Allocated Budget
(min)
This sets a ceiling for outgoing call time for this remote node. The
default for this field is 0 meaning no budget control.
Period (hr) This field is the time period that the budget should be reset. For
example, if we are allowed to call this remote node for a maximum of
10 minutes every hour, then the
Allocated Budget is (10 minutes)
and the Period (hr) is 1 (hour).
Schedule Sets This field is only applicable for PPPoE and PPPoA encapsulation. You
can apply up to four schedule sets here. For more details please refer
to the
Call Schedule Setup chapter.
Nailed up
Connection
This field is only applicable for PPPoE and PPPoA encapsulation.
This field specifies if you want to make the connection to this remote
node a nailed-up connection. More details are given earlier in this
section.
Session Options
Edit Filter Sets Use [SPACE BAR] to choose
Yes and press [ENTER] to open menu
11.5 to edit the filter sets. See the Remote Node Filter section for more
details.
No
(default)
Idle Timeout (sec) Type the number of seconds (0-9999) that can elapse when the
Prestige is idle (there is no traffic going to the remote node), before the
Prestige automatically disconnects the remote node. 0 means that the
session will not timeout.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
18.2.3 Outgoing Authentication Protocol
For obvious reasons, you should employ the strongest authentication protocol possible. However, some
vendors’ implementation includes specific authentication protocol in the user profile. It will disconnect if the
negotiated protocol is different from that in the user profile, even when the negotiated protocol is stronger
than specified. If the peer disconnects right after a successful authentication, make sure that you specify the
correct authentication protocol when connecting to such an implementation.