ZyXEL Communications XS-3900-48F, Руководство пользователя

Страница: 77 / 332

Chapter 6 Basic Setting
XS3900-48F User’s Guide
77
IP Address Enter the in-band management port IP address of your Switch in dotted decimal notation.
For example, 192.168.1.1.
IP Subnet
Mask
Enter the in-band management port IP subnet mask of your Switch in dotted decimal
notation, for example, 255.255.255.0.
Default
Gateway
Enter the in-band management port IP address of the default outgoing gateway in dotted
decimal notation, for example, 192.168.1.254
VID Enter the VLAN identification number to which the in-band management port belongs.
Out-of-band Management IP Address - use these fields to set the settings for the out-of-band management
port.
IP Address Enter the out-of-band management IP address of your Switch in dotted decimal notation.
For example, 192.168.0.1.
IP Subnet
Mask
Enter the IP subnet mask of your Switch in dotted decimal notation, for example,
255.255.255.0.
Default
Gateway
Enter the IP address of the default outgoing gateway in dotted decimal notation, for
example, 192.168.0.254
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to reset the fields to your previous configuration.
In band IP
address You can create up to 64 IP addresses, which are used to access and manage the Switch from
the ports belonging to the pre-defined VLAN(s). You must configure a VLAN first.
IP Address Enter the IP address for managing the Switch by the members of the VLAN specified in the
VID field below.
IP Subnet
Mask
Enter the IP subnet mask in dotted decimal notation.
VID Type the VLAN group identification number.
Default
Gateway
Enter the IP address of the default outgoing gateway in dotted decimal notation.
Add Click Add to insert the entry to the summary table below and save your changes to the
Switch's run-time memory. The Switch loses these changes if it is turned off or loses power,
so use the Save link on the top navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Cancel Click Cancel to reset the fields to your previous configuration.
Index This field displays the index number of an entry.
IP Address This field displays IP address of the Switch in the IP domain.
IP Subnet
Mask This field displays the subnet mask of the Switch in the IP domain.
VID This field displays the VLAN identification number of the IP domain on the Switch.
Default
Gateway This field displays the the IP address of the default outgoing gateway.
Delete Click Delete to remove the selected entry from the summary table.
Note: Deleting all IP subnets locks you out of the Switch.
Cancel Click Cancel to clear the Delete check boxes.
Table 16
Basic Setting > IP Setup (continued)
LABEL DESCRIPTION