manualshive.com logo in svg

ZyXEL Communications XGS1930-28HP, Руководство пользователя

Сетевой коммутатор ZyXEL Communications XGS1930-28HP обеспечивает высокую производительность и расширенные возможности управления. Для ознакомления с настройками и функциями устройства рекомендуется скачать бесплатное Руководство пользователя на manualshive.com. Ознакомьтесь с ним, чтобы полностью раскрыть потенциал этого продукта.

Поделиться
Скачать
background image

Chapter 4 Web Configurator

XGS1930 Series User’s Guide

60

Advanced Application

VLAN

This link takes you to screens where you can configure port-based or 802.1Q VLAN (depending 
on what you configured in the 

Switch Setup 

menu). You can also configure a voice VLAN, a 

MAC based VLAN or a vendor ID based VLAN in these screens.

Static MAC 
Forwarding

This link takes you to a screen where you can configure static MAC addresses for a port. These 
static MAC addresses do not age out.

Static Multicast 
Forwarding

This link takes you to a screen where you can configure static multicast MAC addresses for 
ports. These static multicast MAC addresses do not age out.

Filtering

This link takes you to a screen to set up filtering rules.

Spanning Tree 
Protocol

This link takes you to screens where you can configure the RSTP to prevent network loops.

Bandwidth 
Control

This link takes you to a screen where you can configure bandwidth limits on the Switch.

Broadcast Storm 
Control

This link takes you to a screen to set up broadcast filters.

Mirroring

This link takes you to screens where you can copy traffic from one port or ports to another port 
in order that you can examine the traffic from the first port without interference.

Link Aggregation

This link takes you to screens where you can logically aggregate physical links to form one 
logical, higher-bandwidth link.

Port 
Authentication

This link takes you to a screen where you can configure IEEE 802.1x port authentication as well 
as MAC authentication for clients communicating through the Switch.

Port Security

This link takes you to a screen where you can activate MAC address learning and set the 
maximum number of MAC addresses to learn on a port.

Time Range

This link takes you to a screen where you can define different schedules.

Classifier

This link takes you to screens where you can configure the Switch to group packets based on 
the specified criteria.

Policy Rule

This link takes you to a screen where you can configure the Switch to perform special treatment 
on the grouped packets.

Queuing Method This link takes you to a screen where you can configure queuing with associated queue 

weights for each port.

Multicast

This link takes you to screens where you can configure various multicast features and IGMP 
snooping.

AAA

This link takes you to a screen where you can configure authentication, authorization and 
accounting services through external servers. The external servers should be RADIUS (Remote 
Authentication Dial-In User Service).

DHCP Snooping

This link takes you to screens where you can configure filtering of unauthorized DHCP packets in 
your network.

Loop Guard

This link takes you to a screen where you can configure protection against network loops that 
occur on the edge of your network.

Layer 2 Protocol 
Tunneling

This link takes you to a screen where you can configure L2PT (Layer 2 Protocol Tunneling) 
settings on the Switch.

PPPoE

This link takes you to screens where you can configure how the Switch gives a PPPoE 
termination server additional subscriber information that the server can use to identify and 
authenticate a PPPoE client.

Errdisable

This link takes you to screens where you can view errdisable status and configure errdisable 
settings in CPU protection, errdisable detect, and errdisable recovery.

Green Ethernet

This link takes you to a screen where you can configure green Ethernet settings in EEE, auto 
power down, and short reach for each port.

LLDP

This link takes you to screens where you can configure LLDP settings.

Table 18   Navigation Panel Links (continued)

LINK

DESCRIPTION

Содержание XGS1930-28HP














































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для XGS1930-28HP

Canon Vb-C60 - Ptz Network Camera Setup Manual preview
Vb-C60 - Ptz Network Camera
Бренд: Canon Страницы: 30
Watchguard Wireless Router Quick Start Manual preview
Wireless Router
Бренд: Watchguard Страницы: 11
D-Link DWR-712 Quick Installation Manual preview
DWR-712
Бренд: D-Link Страницы: 32
D-Link DIR-456 Quick Installation Manual preview
DIR-456
Бренд: D-Link Страницы: 28
D-Link DIR-820 Quick Installation Manual preview
DIR-820
Бренд: D-Link Страницы: 48
D-Link EXO DIR-2660 Quick Installation Manual preview
EXO DIR-2660
Бренд: D-Link Страницы: 83
D-Link DIR-508L User Manual preview
DIR-508L
Бренд: D-Link Страницы: 155
Vivotek NR8401 User Manual preview
NR8401
Бренд: Vivotek Страницы: 136
Fortinet FortiAP S311C Quick Start Manual preview
FortiAP S311C
Бренд: Fortinet Страницы: 20
Server Technology Sentry Global Security Modem Installation And Operation Manual preview
Sentry Global Security Modem
Бренд: Server Technology Страницы: 22
IBASE Technology FWA8207 Series User Manual preview
FWA8207 Series
Бренд: IBASE Technology Страницы: 39
Lantech IMR-3003 User Manual preview
IMR-3003
Бренд: Lantech Страницы: 40
3Com EtherLink 3C905C-TX User Manual preview
EtherLink 3C905C-TX
Бренд: 3Com Страницы: 96
Intercoax IXWB-450 Quick Start Manual preview
IXWB-450
Бренд: Intercoax Страницы: 2
Alcatel-Lucent 9364 Installation And Commissioning Manual preview
9364
Бренд: Alcatel-Lucent Страницы: 60
Idis DR-2308P Quick Manual preview
DR-2308P
Бренд: Idis Страницы: 18
Vista VIPER H4 User Manual preview
VIPER H4
Бренд: Vista Страницы: 93
Riverbed SteelCentral NetExpress 470 Upgrade And Maintenance Manual preview
SteelCentral NetExpress 470
Бренд: Riverbed Страницы: 140

Бренды по названию

Популярные бренды

Загрузить еще бренды