ZyXEL Communications WSQ60, Руководство пользователя

Страница: 124 / 210

Chapter 5 Multy M1 Web Configurator
Multy WiFi System User’s Guide
124
OpenVPN Client Use this screen to:
• View basic information about OpenVPN Server accounts that you are
connected to
• Add an OpenVPN Server Account you want your Multy M1 to connect to
when the Multy M1 functions as an OpenVPN client.
Settings
Internet Internet
Connection This screen allows you to configure ISP parameters, WAN IP address
assignment, DNS servers and the WAN MAC address.
NAT & Port
Forwarding Use this screen to enable NAT.
Use this screen to configure servers behind the Multy M1 and forward incoming
service requests to the servers on your local network.
Passthrough Use this screen to change your Multy M1’s port triggering settings.
Dynamic DNS Use this screen to configure dynamic DNS.
UPnP Use this screen to enable UPnP on the Multy M1.
WiFi Main WiFi Use this screen to enable the wireless LAN and configure wireless LAN and
wireless security settings.
Guest WiFi Use this screen to configure multiple BSSs on the Multy M1.
WPS Use this screen to configure WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is enabled.
LAN LAN IP Use this screen to configure the Multy M1’s LAN IP address and subnet mask.
Use this screen to configure the IPv6 address for the Multy M1 on the LAN.
Use this screen to configure your DNS server.
Use this screen to enable the Multy M1’s DHCP server.
IPv6 LAN Use this screen to configure the IPv6 address for your Multy M1 on the LAN.
Firewall IPv4 Firewall Use this screen to configure IPv4 firewall rules.
IPv6 Firewall Use this screen to configure IPv6 firewall rules.
System Status Use this screen to view the basic information of the Multy M1.
General
Setting Use this screen to change password or to set the timeout period of the
management session.
Remote
Access Use this screen to configure the interface/s from which the Multy M1 can be
managed remotely and specify a secure client that can manage the Multy
M1.
Maintenance Use this screen to upgrade firmware, restartthe Multy M1 without turning the
power off or reset the
Multy M1
to factory default settings.
Operating
Mode Use this screen to select whether your device acts as a router, or a bridge.
Logs Use this screen to enable log settings or view the list of activities recorded by
your Multy M1.
Table 8 Settings > System > Status (Standard Mode) (continued)
LINK TAB FUNCTION