ZyXEL Communications WRE6605, Руководство пользователя, Страница: 39 / 54

Chapter 6 Troubleshooting
WRE6605 User’s Guide
39
6.3 Internet Access
I cannot access the Internet.
1
Check the hardware connections, and make sure the LEDs are behaving as expected. See Section 1.5.1
on page 10 .
2
Try to connect directly to the AP. If you can access the Internet, check that the WRE6605 (repeater
mode) has associated with the AP by checking the main screen. See
Section 4.3.1 on page 27 .
3
If you are trying to access the Internet wirelessly, make sure the wireless settings in the wireless client are
the same as the settings in the AP.
4
Make sure your computer is set to obtain a dynamic IP address after finishing configuration.
5
Disconnect all the cables from your device, and follow the directions in the Quick Start Guide again.
6
If the problem continues, contact the network administrator or vendor.
I cannot access the Internet anymore. I had access to the Internet (with the WRE6605 in repeater
mode), but my Internet connection is not available anymore.
1
Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
Start Guide and
Section 1.5.1 on page 10 .
2
Reboot the WRE6605.
3
Try to connect directly to the AP. If you can access the Internet, check that the WRE6605 (repeater
mode) has associated with the AP by checking the main screen. See
Section 4.3.1 on page 27 .
4
If the problem continues, contact the network administrator or vendor.
The Internet connection is slow or intermittent.
1
There might be a lot of traffic on the network. Look at the LEDs, and check Section 1.5.1 on page 10 . If
the WRE6605 is sending or receiving a lot of information, try closing some programs that use the Internet,
especially peer-to-peer applications.
2
Check the signal strength. If the signal strength is low, try moving the WRE6605 closer to the AP if possible,
and look around to see if there are any devices that might be interfering with the wireless network (for
example, microwaves, other wireless networks, and so on).
3
Reboot the WRE6605.