ZyXEL Communications WAP5705, Руководство пользователя

Страница: 60 / 156

Chapter 7 Tutorials
WAP5705 User’s Guide
60
7.5.1 Configuring Security Settings of Multiple SSIDs
This example shows you how to configure the SSIDs with the following parameters on your
WAP5705 (in access point mode).
1
Connect your computer to the LAN port of the WAP5705 using an Ethernet cable.
2
The default IP address of the WAP5705 is “192.168.1.2”. In this case, your computer must have an
IP address in the range between “192.168.1.3” and “192.168.1.254”.
3
Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to
show your computer’s IP address. If your computer’s IP address is not in the correct range then see
Appendix A on page 105 for information on changing your computer’s IP address.
4
After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and
type “http://192.168.1.2” as the web address in your web browser.
5
Enter “1234” (default) as the password and click Login .
6
Type a new password and retype it to confirm, then click Apply . Otherwise, click Ignore .
7
The Easy mode appears. Click Expert Mode in the navigation panel.
8
Go to Configuration > Network > Wireless LAN > General . Configure the screen as follows. In
this example, you select Enable Intra-BSS Traffic for SSID_Worker and SSID_Guest to allow
wireless clients in the same wireless network to communicate with each other. Click Apply .
SSID SECURITY TYPE KEY MAC FILTERING
SSID_Worker WPA2-PSK
WPA Compatible
DoNotStealMyWirelessNet
work Disable
SSID_Guest Static WEP 128bit keyexample123 Disable
SSID_VoIP WPA-PSK VoIPOnly12345678 Allow
00:A0:C5:01:23:45