ZyXEL Communications VMG1312-B10C, Руководство пользователя

Страница: 57 / 294

Chapter 5 Broadband
VMG1312-B10C User’s Guide
57
5.5.1 Edit 802.1X Settings
Use this screen to edit 802.1X authentication settings. Click the Edit icon next to the rule you want
to edit. The screen shown next appears.
Figure 25
802.1x: Add/Edit
The following table describes the labels in this screen.
5.6 The Ethernet WAN Screen
If you are using an ethernet WAN connection, you can configure a LAN port as an ethernet WAN
port. Click
Network Setting > Broadband > Ethernet WAN to open this screen.
Note: LAN port 4 can operate as an Ethernet WAN port.
Table 13
802.1x: Add/Edit
LABEL DESCRIPTION
Active This field allows you to activate/deactivate the authentication.
Select this to enable the authentication. Clear this to disable this authentication without
having to delete the entry.
Interface This field displays where there is an interface available to select for the 802.1X
authentication settings. Select the interface to which to apply the 802.1X authentication
settings.
EAP Identity Enter the EAP identity of the authentication.
EAP method This is the EAP method used for this authentication.
Enable
Bidirectional
Authentication Select this to allow bidirectional authentication.
Certificate Select the certificate you want to assign to the authentication. You need to import the
certificate in the
Security > Certificates > Local Certificates screen.
Trusted CA Select the Trusted CA you want to assign to the authentication. You need to import the
certificate in the
Security > Certificates > Trusted CA screen.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.