ZyXEL Communications SAM1316-22, Руководство пользователя

Страница: 418 / 464

Chapter 60 Virtual Channel Management
SAM1316-22 User’s Guide
418
where
This command lists the domains for 2684 routed mode traffic.
The following example displays the domains for 2684 routed mode traffic for
devices connected to DSL ports 1 and 2.
60.7.10 RPVC Route Delete Command
Syntax:
ras> shdsl rpvc route delete <port number> <vpi> <vci> <ip>/<netmask>
where
This command removes a domain for 2684 routed mode traffic. The domain
includes the subscriber’s LAN IP addresses.
The following example removes a domain for a CPE device is connected to DSL
port 1 on the SAM1316-22 and the 2684 routed mode traffic is to use the PVC
identified by VPI 8 and VCI 35. The CPE device’s LAN IP address is 10.10.10.10
<portlist> =
The port(s) of the RPVC.
You can specify a single DSL port <1>, all DSL ports
<*> or a list of DSL ports <1,3,5>. You can also include
a range of ports <1,5,6~8>.
Figure 256 RPVC Route Show Command Example
ras> shdsl rpvc route show 1,2
port vpi vci ip/netmask
---- --- --- ------------------
1 8 35 10.10.10.0/24
2 8 35 10.10.11.0/24
<port number> =
The port of the RPVC. Specify a single DSL port <1>.
<vpi> =
The VPI of the RPVC.
<vci> =
The VCI of the RPVC.
<ip> =
The subscriber’s CPE LAN IP address in dotted decimal
notation.
/<netmask> =
The bit number of the subnet mask of the subscriber’s
IP address. To find the bit number, convert the subnet
mask to binary and add all of the 1’s together. Take
“255.255.255.0” for example. 255 converts to eight 1’s
in binary. There are three 255’s, so add three eights
together and you get the bit number (24).