ZyXEL Communications SAM1316-22, Руководство пользователя

Страница: 334 / 464

Chapter 51 MAC Commands
SAM1316-22 User’s Guide
334
The following example displays the MAC filtering mode, status and the fixed
source MAC addresses on DSL port 5.
51.2.2 MAC Filter Enable Command
Syntax:
ras> switch mac filter enable [portlist]
where
This command turns on the MAC filtering feature on the specified DSL port(s) or
on all DSL ports if no port is specified.
The following example turns on the MAC filtering feature on DSL port 5.
51.2.3 MAC Filter Disable Command
Syntax:
ras> switch mac filter disable [portlist]
where
This command turns off the MAC filtering feature on the specified DSL port(s) or
on all DSL ports if no port is specified.
Figure 163 MAC Filter Show Command Example
ras> sw mac filter show 5
status:V, enable mac filter function.
status:-, disable mac filter function.
port mode status mac
---- ------ ------ -----------------
5 accept - 00:a0:c5:12:34:56
[portlist] =
You can specify a single DSL port <1>, all DSL ports
<*> or a list of DSL ports <1,3,5>. You can also include
a range of ports <1,5,6~8>.
Figure 164 MAC Filter Enable Command Example
ras> switch mac filter enable 5
[portlist] =
You can specify a single DSL port <1>, all DSL ports
<*> or a list of DSL ports <1,3,5>. You can also include
a range of ports <1,5,6~8>.