ZyXEL Communications SAM1316-22, Руководство пользователя

Страница: 215 / 464

Chapter 31 TLS PVC
SAM1316-22 User’s Guide
215
Note: You can NOT configure PPPoA-to-PPPoE and TLS settings on the same PVC.
Figure 104 TLS PVC
The following table describes the labels in this screen.
Table 72 TLS PVC
LABEL DESCRIPTION
Port Use this drop-down list box to select a port for which you wish to set
up a TLS PVC. This field is read-only once you click on a port number
below.
VPI Type the Virtual Path Identifier for a channel on this port.
VCI Type the Virtual Circuit Identifier for a channel on this port.
DS VC Profile Use the drop-down list box to select a VC profile to use for this
channel’s downstream traffic shaping.
US VC Profile Use the drop-down list box to select a VC profile to use for this
channel’s upstream traffic. The SAM1316-22 does not perform
upstream traffic policing if you do not specify an upstream VC profile.
Note: Upstream traffic policing should be used in conjunction with
the ATM shaping feature on the subscriber’s device. If the
subscriber’s device does not apply the appropriate ATM
shaping, all upstream traffic will be discarded due to
upstream traffic policing.
VID Type a VLAN ID to assign to frames received on this channel.
Note: Make sure the VID is not already used for PPPoA-to-
PPPoE conversions.
Priority Use the drop-down list box to select the priority value (0 to 7) to add
to incoming frames without a (IEEE 802.1p) priority tag.