Prestige 724 G.SHDSL CSU/DSU
TCP/IP
C
If you need Client for Microsoft Networks:
a.
Click
Add
.
b.
Select Client and then click
Add
.
c.
Select
Microsoft
from the list of manufacturers.
d.
Select
Client for Microsoft Networks
from the list of network clients and then click
OK
.
e.
Restart your computer so the changes you made take effect.
Configuration
After you have installed the appropriate TCP/IP components, you must assign your computer information
related to it so that it can “communicate” with your network. The simplest way to achieve this is to have
your computer automatically acquire this information using DHCP (Dynamic Host Control Protocol).
Configuring TCP/IP for Windows 95/98/Me Using DHCP
1.
Install TCP/IP on each computer, leaving the computer configured to obtain configuration settings
automatically (by DHCP).
2.
Connect your Ethernet-interfaced computer to the Prestige
3.
Restart the Prestige and allow it to boot.
4.
Restart each computer.
Configuring TCP/IP for Windows 95/98/Me via Windows using Static Assignment (not using
DHCP)
95.98.Me:
1. In the
Network
window, click the
TCP/IP
entry to select it and click the
Properties
button.
2. In the
TCP/IP Properties
window, select
Obtain an IP address automatically
.
3. Click the
WINS Configuration
tab and select
Disable WINS Resolution
.
4. Click the
Gateway
tab. Highlight any installed gateways and click the
Remove
button until there are
none listed.
5. Click the
DNS Configuration
tab and select
Disable DNS
.
6. Click
OK
to save and close the
TCP/IP Properties
window.
7. Click
OK
to close the
Network
window. You will be prompted to insert your Windows CD.
When the drivers are updated, you will be asked if you want to restart your computer. Make sure your
Prestige is on before clicking
Yes
at the prompt.
Содержание Prestige 724
