ZyXEL Communications Prestige 724, Руководство пользователя

Страница: 56 / 87

Prestige 724 G.SHDSL CSU/DSU
5-6 Firmware and Configuration File Maintenance
Table 5-3 General Commands for Third Party TFTP Clients
COMMAND DESCRIPTION
Host Enter the IP address of the Prestige. 192.168.1.1 is the Prestige’s
default IP address when shipped.
Send/Fetch Use “Send” to upload the file to the Prestige and “Fetch” to back up
the file on your computer.
Local File Enter the path and name of the firmware file (*.bin extension) or
configuration file (*.rom extension) on your computer.
Remote File This is the filename on the Prestige. The filename for the firmware is
“ras” and for the configuration file, is “rom-0”.
Binary Transfer the file in binary mode.
Abort Stop transfer of the file.
Refer to section 5.2.5 to read about configurations that disallow TFTP and FTP over WAN.
5.2.9 Backup Via Console Port
Backup configuration via console port by following the HyperTerminal procedure shown next. Procedures
using other serial communications programs should be similar.
Step 1. Display menu 24.5 and enter “y” at the following screen.
Figure 5-3 System Maintenance — Backup Configuration
Step 2. The following screen indicates that the Xmodem download has started.
Figure 5-4 System Maintenance — Starting Xmodem Download Screen
Step 3.
Run the HyperTerminal program by clicking Transfer , then Receive File as shown in the
following screen.
Ready to backup Configuration via Xmodem.
Do you want to continue (y/n):
You can enter ctrl-x to terminate operation any time.
Starting XMODEM download...