ZyXEL Communications Prestige 724, Руководство пользователя

Страница: 28 / 87

Prestige 724 G.SHDSL CSU/DSU
2-8 Hardware Installation and Initial Setup
Figure 2-7 Menu 23 — System Password
Step 2. Type your new system password (up to 30 characters) and press [ENTER] .
Step 3. Re-type your new system password to confirm and press [ENTER] .
The screen displays an asterisk (
*
) for each character you type.
2.8 Resetting the Prestige
If you forget your password or cannot access the SMT menu, you need to reinstall the configuration file.
Reinstallation replaces the current file with the factory configuration file. All custom configurations will be
lost and the console port speed will be reset to the default. (9600 bps with 8 data bit, no parity, 1 stop bit
(8n1), and no flow control.) The password will be reset to the default of 1234.
Turn off your Prestige and begin a terminal session with the current console port settings. Turn on your
Prestige again. You should see the following screen. When you see the message
Press any key to
enter debug mode within 3 seconds
, press any key. Make sure you already have the
configuration file or download the latest one from the ZyXEL web site.
Figure 2-8 Starting the Prestige
Menu 23 – System Password
Old Password= ****
New Password= ****
Retype to confirm= ****
Press ENTER to CONFIRM or ESC to Cancel:
Bootbase Version: V2.04 | 2/7/2001 18:08:22
RAM: Size = 8192 Kbytes
DRAM POST: Testing: 8192K OK
FLASH: Intel 16M
ZyNOS Version: V3.40(BJ.0)a0 | 5/31/2001 15:57:50
Press any key to enter debug mode within 3 seconds.
.........................................
(Compressed)
Version: P724, start: 0203e030
Length: 151338, Checksum: 077E
Compressed Length: B3133, Checksum: 5E4C