Prestige 681 SDSL Router
Remote Node Configuration
5-3
Field
Description
Options
Outgoing:
My
Password
Enter the password for your Prestige when it calls this
remote node.
This field sets the authentication protocol used for outgoing
calls.
Options for this field are:
l
CHAP/PAP
- Your Prestige will accept either CHAP or
PAP when requested by this remote node.
CHAP/PAP
l
CHAP
- accept CHAP only.
CHAP
Outgoing:
Authen
l
PAP
- accept PAP only.
l
None
– no authentication protocol is used for outgoing
calls.
PAP
None
Route
This field determines the protocols that your Prestige will
route.
IP, IPX,
IP+IPX,
None
Bridge
Bridging is used for protocols that the Prestige does not
support, e.g., SNA, or not turned on in the previous Route
field. When bridging is enabled, your Prestige will forward
any packet that it does not route to this remote node;
otherwise, the packets are discarded. .
Press
[SPACE
BAR] to
toggle
Yes/No
Edit PPP Options
To edit the PPP options for this remote node, move the
cursor to this field, use the [SPACE BAR] to select
Yes
and
press [ENTER]. This will bring you to
Menu 11.2 - Remote
Node PPP Options
. For more information on configuring
PPP options,
see section 5.1.3
Editing PPP Options.
Press
[SPACE
BAR] to
toggle to
Yes
and
then press
[ENTER]
Rem IP Addr
Enter the IP address of the remote gateway here. If you
don’t know this IP, then enter 0.0.0.0 .
Edit IP/IPX/Bridge
Press the [SPACE BAR] to toggle this field to
Yes
and then
press [ENTER] to go to
Menu 11.3 - Remote Node
Network Layer Options
menu.
Yes
or
No
Session Option:
Edit Filter Sets
Use the [SPACE BAR] to toggle this field to
Yes
and press
[ENTER] to open Menu 11.5 to edit the filter sets. See the
Remote Node Filter section for more details.
Default=
No
Once you have completed filling in Menu 11.1 – Remote Node Profile, press [ENTER] at the message
[Press ENTER to Confirm…] to save your configuration, or press [Esc] at any time to cancel.
