Chapter 3 Web Configurator
PLA6456 User’s Guide
26
Upon clicking
Ok
for
Broadcast suppression
, reboot your PLA by clicking
Hardware Reset
to make the
changes when the next screen appears.
Figure 13
Hardware Reset
Note: Do NOT click
Ok
for
Factory Reset
.
3.8 Log File Settings
Use the
Log file
screen to allow your PLA to send event logs to an FTP server. You can set the data
capture time interval as well as how often it uploads to the FTP server.
Figure 14
Log File Screen
The following table describes the labels in this screen.
Broadcast xput
limit (Mbps)
Broadcast suppression prevents the Ethernet port from being overloaded by a broadcast storm.
In
Broadcast xput limit
, set the maximum throughput allowed before suppressing broadcast
traffic.
0
disables broadcast suppression.
Click
Ok
for the changes to take effect.
Table 9 Multicast Screen (continued)
LABEL
DESCRIPTION
Table 10 Log file Screen
LABEL
DESCRIPTION
Log File Configuration
Enable Log File
Select
YES
to allow your PLA to send event logs to an FTP server. Otherwise, select
NO
to disable
it.
Data capture
interval(s)
This field allows you to set the time interval (1 ~ 9,999,999 seconds) to capture data.
Содержание PLA6456
Страница 6: ...6 PART I User s Guide...
Страница 15: ...15 PART II Technical Reference...
