ZyXEL Communications PLA6456, Руководство пользователя

Страница: 29 / 50

Chapter 4 HomeGrid Network Setup Tutorial
PLA6456 User’s Guide
29
Figure 15 Plug Your PLA into a Power Socket
2
Connect the PLA to your computer.
3
Use a LAN or Ethernet cable (shown below) to connect the LAN or Ethernet port on your adapter to the
same kind of port on your computer.
Figure 16 Connect Your PLA to a Computer
4
Open the Web Configurator on your computer. See Section 3.2 on page 17 for how to launch the Web
Configurator.
5
You are now ready to extend your HomeGrid network or set up a second network.
• See Section 4.4 on page 29 to add a new PLA to your network.
• See Section 4.5 on page 31 to set up a second network with your new adapters.
4.4 Adding a PLA
This section shows you how to add a new PLA to expand your existing network.
The figure below shows the family computer with Internet access on a HomeGrid network. Expand the
network by adding a new PLA connected to a printer.
1
PLA
2
3