ZyXEL Communications P-873HNU-51B, Руководство пользователя

Страница: 134 / 339

Chapter 10 Quality of Service (QoS)
P-873HNU(P)-51B User’s Guide
134
10.2 What You Need to Know
The following terms and concepts may help as you read through this chapter.
QoS versus Cos
QoS is used to prioritize source-to-destination traffic flows. All packets in the same flow are given
the same priority. CoS (class of service) is a way of managing traffic in a network by grouping
similar types of traffic together and treating each type as a class. You can use CoS to give different
priorities to different packet types.
CoS technologies include IEEE 802.1p layer 2 tagging and DiffServ (Differentiated Services or DS).
IEEE 802.1p tagging makes use of three bits in the packet header, while DiffServ is a new protocol
and defines a new DS field, which replaces the eight-bit ToS (Type of Service) field in the IP header.
Tagging and Marking
In a QoS class, you can configure whether to add or change the DSCP (DiffServ Code Point) value,
IEEE 802.1p priority level and VLAN ID number in a matched packet. When the packet passes
through a compatible network, the networking device, such as a backbone switch, can provide
specific treatment or service based on the tag or marker.
Traffic Shaping
Bursty traffic may cause network congestion. Traffic shaping regulates packets to be transmitted
with a pre-configured data transmission rate using buffers (or queues). Your VDSL Router uses the
Token Bucket algorithm to allow a certain amount of large bursts while keeping a limit at the
average rate.
Tr
af
fi
c
Time
Traffic Rate
Tr
af
fi
c
Time
Traffic Rate
(Before Traffic Shaping) (After Traffic Shaping)