ZyXEL Communications P-861H-G1 Скачать руководство пользователя страница 316

Страница: 316 / 341

Prestige 861H Series User’s Guide

315

Appendix H Log Descriptions

Table 110

Access Control Logs

LOG MESSAGE

DESCRIPTION

Firewall default policy: [TCP |
UDP | IGMP | ESP | GRE | OSPF]
<Packet Direction>

Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access

matched the default policy and was blocked or forwarded

according to the default policy’s setting.

Firewall rule [NOT] match:[TCP |
UDP | IGMP | ESP | GRE | OSPF]
<Packet Direction>, <rule:%d>

Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access

matched (or did not match) a configured firewall rule

(denoted by its number) and was blocked or forwarded

according to the rule.

Triangle route packet forwarded:
[TCP | UDP | IGMP | ESP | GRE |
OSPF]

The firewall allowed a triangle route session to pass

through.

Packet without a NAT table entry
blocked: [TCP | UDP | IGMP | ESP
| GRE | OSPF]

The router blocked a packet that didn't have a

corresponding NAT table entry.

Router sent blocked web site
message: TCP

The router sent a message to notify a user that the router

blocked access to a web site that the user requested.

Configuration Change: PC =
0x%x, Task ID = 0x%x

The router is saving configuration changes.

Successful SSH login

Someone has logged on to the router’s SSH server.

SSH login failed

Someone has failed to log on to the router’s SSH server.

Successful HTTPS login

Someone has logged on to the router's web configurator

interface using HTTPS protocol.

HTTPS login failed

Someone has failed to log on to the router's web configurator

interface using HTTPS protocol.

Table 109

System Error Logs

LOG MESSAGE

DESCRIPTION

%s exceeds the max.
number of session per
host!

This attempt to create a NAT session exceeds the maximum

number of NAT session table entries allowed to be created per

host.

setNetBIOSFilter: calloc
error

The router failed to allocate memory for the NetBIOS filter settings.

readNetBIOSFilter: calloc
error

The router failed to allocate memory for the NetBIOS filter settings.

WAN connection is down.

A WAN connection is down. You cannot access the network

through this interface.

Table 108

System Maintenance Logs (continued)

LOG MESSAGE

DESCRIPTION

Содержание P-861H-G1






















































































































































































































































































































































Результаты поиска

Содержание P-861H-G1

Отзывы:

ZyXEL Communications P-861H-G1, Руководство пользователя, Страница: 316 / 341

Результаты поиска

Содержание P-861H-G1

Отзывы: