manualshive.com logo in svg

ZyXEL Communications P-861H-G1, Руководство пользователя, Страница: 210 / 341

Поделиться
Скачать
ZyXEL Communications P-861H-G1 Скачать руководство пользователя страница 210

Prestige 861H Series User’s Guide

209 

Chapter 23 System Information and Diagnosis

Figure 140   

Menu 24.2.1 System Maintenance: Information

                  Menu 24.2.1 - System Maintenance - Information

                    Name: P861H
                    Routing: IP/BRIDGE
                    ZyNOS F/W Version: V3.40(RI.3) | 03/24/2005
                    VDSL Chipset Vendor: Ikanos, Version 6.5.2r6
                    Standard: 998-138-8500(3Band)

                    LAN
                      Ethernet Address: 00:a0:c5:01:23:45
                      IP Address: 192.168.1.1
                      IP Mask: 255.255.255.0
                      DHCP: Server

                          Press ESC or RETURN to Exit:

The following table describes the fields in this menu.

Table 64   

Menu 24.2.1 System Maintenance: Information 

FIELD

DESCRIPTION

Name

Displays the system name of your Prestige. This information can be changed in 

Menu 1 – General Setup

.

Routing

Refers to the routing protocol used.

ZyNOS F/W Version

Refers to the ZyNOS (ZyXEL Network Operating System) system firmware 

version. ZyNOS is a registered trademark of ZyXEL Communications 

Corporation.

VDSL Chipset 

Vendor

Displays the vendor of the VDSL chipset and DSL version.

Standard

This refers to the operational protocol the Prestige and the DSLAM (Digital 

Subscriber Line Access Multiplexer) are using.

LAN

Ethernet Address

Refers to the Ethernet MAC (Media Access Control) of your Prestige.

IP Address

This is the IP address of the Prestige in dotted decimal notation.

IP Mask

This shows the subnet mask of the Prestige.

DHCP

This field shows the DHCP setting (None, Relay or Server) of the Prestige.

23.3.2  Console Port Speed

Note: 

The console port is internal and reserved for technician use only.

You can set up different port speeds for the console port through 

Menu 24.2.2 – System 

Maintenance – Console Port Speed

. Your Prestige supports 9600 (default), 19200, 38400, 

57600 and 115200 bps. Press [

SPACE BAR

] and then 

[ENTER] 

to select the desired speed in 

menu 24.2.2, as shown in the following figure.

Содержание P-861H-G1






















































































































































































































































































































































Отзывы:

Нет отзывов