manualshive.com logo in svg

ZyXEL Communications P-861H-G1, Руководство пользователя, Страница: 104 / 341

Поделиться
Скачать
ZyXEL Communications P-861H-G1 Скачать руководство пользователя страница 104

Prestige 861H Series User’s Guide

103 

Chapter 9 Remote Management Configuration

• Get - Allows the manager to retrieve an object variable from the agent. 
• GetNext - Allows the manager to retrieve the next object variable from a table or list 

within an agent. In SNMPv1, when a manager wants to retrieve all elements of a table 
from an agent, it initiates a Get operation, followed by a series of GetNext operations. 

• Set - Allows the manager to set values for object variables within an agent. 
• Trap - Used by the agent to inform the manager of some events.

9.5.1  Supported MIBs

The Prestige supports MIB II that is defined in RFC-1213 and RFC-1215. The focus of the 
MIBs is to let administrators collect statistical data and monitor status and performance.

9.5.2  SNMP Traps 

The Prestige will send traps to the SNMP manager when any one of the following events 
occurs:

Table 24   

SNMP Traps

TRAP # TRAP NAME

DESCRIPTION

0

coldStart (defined in RFC-1215)

A trap is sent after booting (power on).

1

warmStart (defined in RFC-1215)

A trap is sent after booting (software 

reboot).

4

authenticationFailure (defined in RFC-1215)

A trap is sent to the manager when 

receiving any SNMP get or set 

requirements with the wrong community 

(password).

6

whyReboot (defined in ZYXEL-MIB)

A trap is sent with the reason of restart 

before rebooting when the system is 

going to restart (warm start).

6a

For intentional reboot :

A trap is sent with the message "System 

reboot by user!" if reboot is done 

intentionally, (for example, download new 

files, CI command "sys reboot", etc.).

6b

For fatal error : 

A trap is sent with the message of the 

fatal code if the system reboots because 

of fatal errors

9.6  ICMP

If an outside user attempts to probe an unsupported port on your Prestige, an ICMP response 
packet is automatically returned.  This allows the outside user to know the Prestige exists. 
Your Prestige supports anti-probing, which prevents the ICMP response packet from being 
sent. This keeps outsiders from discovering your Prestige when unsupported ports are probed. 

Содержание P-861H-G1






















































































































































































































































































































































Отзывы:

Нет отзывов