manualshive.com logo in svg

ZyXEL Communications P-861H-G1, Руководство пользователя, Страница: 307 / 341

Поделиться
Скачать
ZyXEL Communications P-861H-G1 Скачать руководство пользователя страница 307

Prestige 861H Series User’s Guide

Appendix E NetBIOS Filter Commands

306

Appendix E

NetBIOS Filter Commands

The following describes the NetBIOS packet filter commands.

Introduction

NetBIOS (Network Basic Input/Output System) are TCP or UDP broadcast packets that 
enable a computer to connect to and communicate with a LAN. 

For some dial-up services such as PPPoE or PPTP, NetBIOS packets cause unwanted calls.

You can configure NetBIOS filters to do the following:

• Allow or disallow the sending of NetBIOS packets from the LAN to the WAN and from 

the WAN to the LAN.

• Allow or disallow the sending of NetBIOS packets from the LAN to the DMZ and from 

the DMZ to the LAN.

• Allow or disallow the sending of NetBIOS packets from the WAN to the DMZ and from 

the DMZ to the WAN.

• Allow or disallow the sending of NetBIOS packets through VPN connections.
• Allow or disallow NetBIOS packets to initiate calls.

Syntax:

sys filter netbios disp

Display NetBIOS Filter Settings

This command gives a read-only list of the current NetBIOS filter modes for The Prestige.

NetBIOS Display Filter Settings Command Example

=========== NetBIOS Filter Status ===========
        Between LAN and WAN: Block
        Between LAN and DMZ: Block
        Between WAN and DMZ: Block
        IPSec Packets: Forward
        Trigger Dial: Disabled

Содержание P-861H-G1






















































































































































































































































































































































Отзывы:

Нет отзывов