manualshive.com logo in svg

ZyXEL Communications P-861H-G1, Руководство пользователя, Страница: 158 / 341

Поделиться
Скачать
ZyXEL Communications P-861H-G1 Скачать руководство пользователя страница 158

Prestige 861H Series User’s Guide

157 

Chapter 17 Remote Node Configuration

17.2.3  Outgoing Authentication Protocol

For obvious reasons, you should employ the strongest authentication protocol possible. 
However, some vendors’ implementation includes specific authentication protocol in the user 
profile. It will disconnect if the negotiated protocol is different from that in the user profile, 
even when the negotiated protocol is stronger than specified. If the peer disconnects right after 
a successful authentication, make sure that you specify the correct authentication protocol 
when connecting to such an implementation.

Authen

This field sets the authentication protocol used for outgoing calls. Options for this 

field are:

CHAP

/

PAP

 – Your Prestige will accept either 

CHAP

 or 

PAP

 when requested by 

this remote node.

CHAP

 – accept 

CHAP

 (Challenge Handshake Authentication Protocol) only.

PAP

 – accept PAP (Password Authentication Protocol) only.

Route

This field determines the protocol used in routing. Options are 

IP 

and

 None.

Bridge

When bridging is enabled, your Prestige will forward any packet that it does not 

route to this remote node; otherwise, the packets are discarded. Select 

Yes

 to 

enable and 

No

 to disable.

Edit IP/Bridge

Press [SPACE BAR] to select 

Yes

 and press [ENTER] to display 

Menu 11.3 – 

Remote Node Network Layer Options

.

Edit ATM Options

Press [SPACE BAR] to select 

Yes

 and press [ENTER] to display 

Menu 11.6 – 

Remote Node ATM Layer Options

.

Edit Advance 

Options

This field is only available when you select 

PPPoE

 in the 

Encapsulation

 field.

Press [SPACE BAR] to select 

Yes

 and press [ENTER] to display 

Menu 11.8 – 

Advance Setup Options

. 

Telco Option

Allocated Budget 

(min)

This sets a ceiling for outgoing call time for this remote node. The default for this 

field is 0 meaning no budget control. 

Period (hr)

This field is the time period that the budget should be reset. For example, if we 

are allowed to call this remote node for a maximum of 10 minutes every hour, 

then the 

Allocated Budget 

is (10 minutes) and the 

Period (hr)

 is 1 (hour).

Schedule Sets

This field is only applicable for 

PPPoE

 and 

PPPoA

 encapsulation. You can apply 

up to four schedule sets here. For more details please refer to 

Chapter 28 on 

page 246

.

Nailed up 

Connection

This field is only applicable for 

PPPoE

 and 

PPPoA 

encapsulation. This field 

specifies if you want to make the connection to this remote node a nailed-up 

connection.  More details are given earlier in this section.

Session Options

Edit Filter Sets

Use [SPACE BAR] to choose 

Yes

 and press [ENTER] to open menu 11.5 to edit 

the filter sets. See 

Chapter 21 on page 188

 for more details.

Idle Timeout (sec)

Type the number of seconds (0-9999) that can elapse when the Prestige is idle 

(there is no traffic going to the remote node), before the Prestige automatically 

disconnects the remote node. 0 means that the session will not timeout.

When you have completed this menu, press [ENTER] at the prompt “

Press ENTER to Confirm 

or ESC to Cancel:

”  to save your configuration, or press [ESC] at any time to cancel.

Table 45   

Menu 11.1 Remote Node Profile (continued)

FIELD

DESCRIPTION

Содержание P-861H-G1






















































































































































































































































































































































Отзывы:

Нет отзывов