ZyXEL Communications NSA320, Руководство пользователя

Страница: 326 / 384

Chapter 18 Maintenance Screens
Media Server User’s Guide
326
Click Maintenance > Power to display the following screen.
Figure 180
Maintenance > Power
The following table describes the labels in this screen.
Table 114
Maintenance > Power
LABEL DESCRIPTION
Power Management
Turn off hard
disk(s) Enter the number of minutes to wait when the NSA is idle before spinning the hard disks
down to sleep (hibernation). The default time is 15 minutes.
Enable Sleeping
HDD LED
Blinking Select this to have the HDD LED blink slowly when the hard disk is sleeping (hibernating).
Clear this to have the HDD LED stay on when the hard disk is sleeping.
Minimum UPS Capacity
Minimum UPS
Capacity When you use an APC Uninterruptible Power Supply (UPS) with a USB connection to the
NSA, the NSA shuts itself down if the APC UPS’s battery charge gets down to the
percentage you specify in this field. This allows the NSA to shut down properly and avoid
data loss caused by a power failure when the UPS stops supplying power.
A setting around 50% is recommended. A setting close to 100% is not recommended since
it would cause the NSA to shut down whenever the UPS is charging. A setting close to 0 is
also not recommended since the UPS would not have enough power to allow the NSA to
shutdown properly.
Power On After
Power Failure Select an option to set whether or not the NSA restarts when the power is restored after a
power failure.
Note: This feature is not supported on NSA310.
Keep Former
Status
Select this option to have the NSA automatically restart only if it was operating when the
power failed. The NSA remains off if it was already off when the power failed.
Always
Power On
Select this option to keep the NSA operating as much of the time as possible. The NSA
restarts automatically even if it was turned off when the power failed.