ZyXEL Communications NSA320, Руководство пользователя

Страница: 28 / 384

Chapter 2 NAS Starter Utility
Media Server User’s Guide
28
Click Configuration > System Setting in the main utility screen to display the following screen.
Figure 14
NAS Starter Utility > Configuration > System Setting
The following table describes the labels in this screen.
Table 4
NAS Starter Utility > Configuration > System Setting
LABEL DESCRIPTION
Server Name Specify a name to uniquely identify the NSA on your network. You can enter up to 15
alphanumeric characters with minus signs allowed but not as the last character. The
name must begin with an alphabetic character (a-z) and is case sensitive.
Time Zone Choose the time zone of your location. This will set the time difference between your
time zone and Greenwich Mean Time (GMT).
Enable PPPoE
Connection Click this if your Internet connection requires you to enter a user name and password to
connect to the Internet. Enter your user name and password
Automatically get
IP address Select this if the NSA is automatically assigned an IP address from the ISP or a DHCP
server in your network.
Manually assign IP
address Select this if you want to assign the NSA a fixed IP address, subnet mask and default
gateway.
Note: Do not configure an IP address that is already in use in your network. This results to
a network IP address conflict and makes the NSA inaccessible.
Use from DHCP
server Domain Name System (DNS) is for mapping a domain name to its corresponding IP
address and vice versa. Select this if the NSA is automatically given DNS information
from the ISP or a DHCP server in your network.
DNS Domain Name System (DNS) is for mapping a domain name to its corresponding IP
address and vice versa.
Select Use from DHCP server if the NSA is automatically given DNS information from
the ISP or a DHCP server in your network.
Select Manually assign DNS server if you were given specific IP address(es) of the
DNS server(s). Enter the primary and secondary DNS in the corresponding fields.