ZyXEL Communications MGS3750-28F Скачать руководство пользователя страница 82

Страница: 82 / 82

Appendix B Legal Information

MGS3750-28F User’s Guide

purchase, should the product have indications of failure due to faulty workmanship and/or materials, ZyXEL will, at its discretion, repair or

replace the defective products or components without charge for either parts or labor, and to whatever extent it shall deem necessary to

restore the product or components to proper operating condition. Any replacement will consist of a new or re-manufactured functionally

equivalent product of equal or higher value, and will be solely at the discretion of ZyXEL. This warranty shall not apply if the product has

been modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions.

Note

Repair or replacement, as provided under this warranty, is the exclusive remedy of the purchaser. This warranty is in lieu of all other

warranties, express or implied, including any implied warranty of merchantability or fitness for a particular use or purpose. ZyXEL shall in

no event be held liable for indirect or consequential damages of any kind to the purchaser.
To obtain the services of this warranty, contact your vendor. You may also refer to the warranty policy for the region in which you bought

the device at http://www.zyxel.com/web/support_warranty_info.php.

Registration

Register your product online to receive e-mail notices of firmware upgrades and information at www.zyxel.com for global products, or at

www.us.zyxel.com for North American products.

Trademarks

ZyNOS (ZyXEL Network Operating System) and ZON (ZyXEL One Network)are registered trademarks of ZyXEL Communications, Inc.

Other trademarks mentioned in this publication are used for identification purposes only and may be properties of their respective owners.

Open Source Licenses

This product contains in part some free software distributed under GPL license terms and/or GPL like licenses. Open source licenses are

provided with the firmware package. You can download the latest firmware at www.zyxel.com. To obtain the source code covered under

those Licenses, please contact [email protected] to get it.

Содержание MGS3750-28F



















































































Результаты поиска

Содержание MGS3750-28F

Отзывы:

Похожие инструкции для MGS3750-28F

Бренды по названию

Популярные бренды

ZyXEL Communications MGS3750-28F, Руководство пользователя

Результаты поиска

Содержание MGS3750-28F

Отзывы:

Похожие инструкции для MGS3750-28F

Бренды по названию

Популярные бренды