ZyXEL Communications MGS3750-28F, Руководство пользователя

Страница: 37 / 82

Chapter 6 Advanced Application Configurations
MGS3750-28F User’s Guide
37
Once a ring is added, it will show in the list.
Figure 28
Ring ID List Screen
The following table describes the fields in this screen.
6.6 Layer 2 Protocol Tunnel
Use the screen to set the packet to be sent by the port.
Add Click Add to insert the entry in the summary table below and save your changes to
the Switch’s run-time memory. The Switch loses these changes if it is turned off or
loses power.
Cancel Click Cancel to reset the fields back to your previous configuration.
Clear Click Clear to delete the configurations of the above fields.
Table 21
EAPS Screen
LABEL DESCRIPTION
Ring ID This field displays the ring ID. "0" means master ring; "1" means sub ring.
Active This field displays whether the Ring ID is active or not.
Role This field displays whetehr the Bridge Role is master or transit .
Level This field displays the ring level.
Stm This field displays the statement.
Query Solicit This field displays whether Query Solicit is enabled or not.
Primary/Common
Port:State
This field displays the EAPS Primary Port Number and state.
Secondary/Edge
Port:State
This field displays the EAPS secondary Port Number and state.
Delete Click Delete to remove the selected entry from the summary table.
Table 20
EAPS Screen
LABEL DESCRIPTION