ZyXEL Communications MAX318M2W, Руководство пользователя

Страница: 93 / 294

Chapter 7 Network Settings
MAX318M2W User’s Guide
93
7.3 PPPoE
Use these settings to configure the PPPoE connection between the WiMAX Device
and the service provider.
Click Network Setting > WAN > PPPoE.
Figure 34 PPPoE Screen
This screen contains the following fields:
Table 26 PPPoE
LABEL DESCRIPTION
User Name Enter the username for PPPoE login into the WAN network.
Password Enter the password for PPPoE login into the WAN network.
Retype
Password Retype the password to confirm it.
Auth Protocol Select a PPPoE authentication protocol. The WiMAX Device supports the
following:
• CHAP - The Challenge Handshake Authentication Protocol (CHAP)
uses PPP to authenticate remote devices using a three-way
handshake and shared secret verification.
• PAP - Password Authentication Protocol uses unencrypted plaintext
to send a passwords for authentication over the network. It’s
probably not a good idea to rely on this for security.
• MS-CHAP v1/2 -This is Microsoft’s variant of Challenge Handshake
Authentication Protocol (CHAP). It allows for mutual authentication
between devices.
MPPE
Encryption Use this option to enable or disable authentication through Microsoft
Point-To-Point Encryption (MPPE) protocol.