ZyXEL Communications MAX318M2W, Руководство пользователя

Страница: 92 / 294

Chapter 7 Network Settings
MAX318M2W User’s Guide
92
Get IP Method Select how the WiMAX Device receives its IP address.
• User - Select this to manually enter the IP address the WiMAX
Device uses.
• From ISP - Select to automatically get the IP address the WiMAX
Device uses from the ISP.
WAN IP Request
Timeout Enter the number of seconds the WiMAX Device waits for an IP from the
ISP before it times out.
WAN IP Address If the WiMAX Device gets its IP from the user, enter the IP address it is
to use.
WAN IP Subnet
Mask If the WiMAX Device gets its IP from the ISP, enter the IP address it is
to use.
Gateway IP
Address If the WiMAX Device gets its gateway IP address from the user, enter
the IP address it is to use.
MTU Enter the Maximum Transmission Unit (MTU) for the WiMAX Device.
This is the largest protocol unit that the WiMAX Device allows to pass
through it.
Clone MAC
Address Enter a MAC address here for registering bridged devices on the
network if their current MAC addresses are causing problems. For
example, this can happen when a desktop computer swaps network
interface cards; the original NIC may have used its MAC address to
register itself on the network and now the new NIC is unrecognized.
Using a MAC address that you know is valid, i.e. a “clone”, allows that
device to stay registered.
First~Third DNS
Server Select how the WiMAX Device acquires its DNS server address.
• From ISP - Select this to have the WiMAX Device acquire its DNS
server address from the ISP.
• User Define - Select this to manually enter the DNS server used by
the WiMAX Device.
Table 25 WAN (continued)
LABEL DESCRIPTION