ZyXEL Communications MAX318M2W, Руководство пользователя

Страница: 101 / 294

Chapter 7 Network Settings
MAX318M2W User’s Guide
101
Click Network Setting > WLAN > MAC Address Filter to open this screen as
shown next.
Figure 42 MAC Address Filter Screen
This screen contains the following fields:
Table 33 MAC Address Filter
LABEL DESCRIPTION
Enable MAC
Address Filter Select the check box to enable MAC address filtering. Then the following
fields diaplay.
Mode Define the filter action for the list of MAC addresses in the MAC address
table.
Select Allow listed stations to permit access to the WiMAX Device
only to addresses listed. MAC addresses not listed will be denied access
to the WiMAX Device.
Select Deny listed stations to block access to the WiMAX Device to
the computers or devices listed in this list.
# This is the index number of the MAC address entry.
Active Select this box to make the policy effective or ineffective for a particular
device.
Name Type the name of the device. The name can be up to 20 characters
long, and any combination of letters, numbers or symbols.
MAC Address Enter the MAC addresses of the wireless devices that are allowed or
denied access to the WiMAX Device in these address fields. Enter the
MAC addresses in a valid MAC address format, that is, six hexadecimal
character pairs, for example, 12:34:56:78:9a:bc.
Delete Click to delete a specific MAC address from the list.
Add Click to add a MAC address to the list.
OK Click this button when you are done adding a MAC Address.