ZyXEL Communications MAX-200M1 Series, Руководство пользователя

Страница: 159 / 258

ZyXEL MAX-200M1 Series User’s Guide
Chapter 16 Remote MGMT 159
Figure 89 Management > Remote MGMT > SNMP
The
following table describes the labels in this screen.
Table 54 Remote Management: SNMP
LABEL DESCRIPTION
SNMP Configuration
Get Community Enter the Get Community , which is the password for the incoming Get and
GetNext requests from the management station. The default is public and allows
all requests.
Set Community Enter the Set community , which is the password for incoming Set requests from
the management station. The default is public and allows all requests.
Trap Community Enter the trap community, which is the password sent with each trap to the
SNMP manager. The default is public and allows all requests.
Trap Destination Enter the IP address of the station to send your SNMP traps to.
SNMP
Port You may change the server port number for a service if needed, however you
must use the same port number in order to use that service for remote
management.
Access Status Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select
All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify
to access the ZyXEL Device using this service.
Apply Click this button to save your customized settings and exit this screen.
Reset Click this button to set each field in this screen to its default value.